Solo documento principale.
Ident
ific
at
ion:
M
D
-AL
-GI
-00
R
ev
. 4
.0
of
31.
01.
18
-
Appl
ic
at
ion
: G
ID
Pile Reg. IT12110P00002965 -
Share Capital € 100,000.00 fully paid up
AR Bus. Reg. no. 03225010481
– AR REA no. - 94189
Certified Company ISO 9001 - Certificate no. 9151 - CNS0 - IT-17778
Zucchetti Centro Sistemi S.p.A. - Green Innovation Division
Via Lungarno, 248 - 52028 Terranuova Bracciolini - Arezzo, Italy
tel. +39 055 91971 - fax. +39 055 9197515
[email protected] - [email protected] -
zcsazzurro.com
Manual of 25/08/2020 Rev. 1.2 “User Manual 7000-BE-24”
12/43
Figure 2 - Labels present on the charging station
2.
Product features
2.1.
Product presentation
The AC charging stations of the 7000-BE-24 series are electric vehicle battery chargers that can
communicate with the Battery Management System (BMS) of vehicles and provide them with the power
needed for charging, thus guaranteeing the protection of the electrical system. They do not convert the
mains voltage or current but simply regulate the flow and have internal protection devices in case of
short circuit or other types of battery faults. The charging station draws the energy needed from the
photovoltaic system (if present) or from the grid, depending on availability. The figure below shows a
typical installation (the photovoltaic system inside the barred box).
Figure 3 – Example of a charging station connected to a PV system (optional) and grid
The charging stations can only be connected to grids with voltage and frequency values within the range
specified in the technical datasheet. It is also very important to know the installation requirements in
order to understand exactly which configurations to adopt and which options to choose.
DO NOT remove the labels. DO NOT cover
with sheets, supports, cabinets, etc.
Always keep them clean and legible.