
802.11ax Access Point
User Manual
58-150006-IQN_V1.0
Page 28
The following parameters are available in this section:
Parameter
Description
Bring up on Boot
Select this option to bring up this interface when the device rebooted.
Use Builtin IPv6-
Management
Using the Builtin IPv6-Management.
Use Broadcast Flag
Select this option to use the broadcast flag on this interface.
Use Default Gateway
Select this option to use the DHCP assigned default gateway on this interface.
Use DNS Servers
Advertised by Peer
Select this option to use the DHCP assigned DNS server addresses on this interface.
Use Gateway Metric
Enter the metric for the gateway here.
Client ID / Vendor Class
to Send When
Requesting DHCP
Enter the ID/vendor class of the DHCP client that is sent when the DHCP service is
requested here.
Override MAC Address /
MTU
Enter a MAC address/ MTU value here to override the default MAC address/MTU value
for this interface.