802.11ax Access Point
User Manual
58-150006-IQN_V1.0
Page 10
Next click the General Button. Once login, first assign a fixed IP address or a DHCP IP to the AP under Current IP
Setting. Under Wireless Switch Setting, select Connect with Wireless Switch via IP and input the IP address of the AP
access controller, then click save & apply to take effect.
Parameter
Description
IP Mode
Displays basic mode information of the ipMod.
IPv4
–
Select IPv4 mode.
IPv6 - Select IPv6 mode.
Auto
–
Auto detected if it is IPv4 or IPv6.
DHCP Client
Choose the DHCP Client, which is Close, or Open by default it will be Open.
IP Address
Enter the IP address.
Subnet Mask
Enter the Subnet Mask.
Default Gateway
Enter the IPv4 address of the gateway for the interface.
Primary / Secondary
DNS Server
Enter primary/secondary DNS server. (if require the second one)
IPv6 Address
Enter the IPv6 address.
IPv6 Prefix
Enter the IPv6 prefix IP address.
Default Gateway
Enter the IPv6 address of the gateway for the interface.
Connect mode
Displays basic information of the switch mod:
Connect with via DHCP
–
connect the AP via DHCP of the network or provided by the
Access controller DHCP IP address.
IP
–
Connect the AP via Access controller IP address.
DNS - Displays the MAC address of the interface.
Wireless LAN Controller
Address 1/2/3/4
Enter wireless access controller IPv4 IP address.
Wireless LAN Controller
IPv6 Address1/2/3/4
Enter wireless access controller IPv6 IP address.
Wireless Switch
Name1/2/3/4
Enter access controller DNS value.
Management VLAN ID
Enter specific management VLAN ID which is providing from the Network.