802.11ax Access Point
User Manual
58-150006-IQN_V1.0
Page 24
4.3.3.1.1.2. Advanced Settings
The following parameters are available in this section:
Parameter
Description
Bring Up On Boot
Select this option to bring up this interface when the device rebooted.
Use Builtin IPv6-
Management
Using the Builtin IPv6-Management.
Override MAC Address
Enter a MAC address here to override the default MAC address for this interface.
Override MTU
Enter the MTU (Maximum Transmission Unit) value here to override the default MTU
value used on this interface.
Use Gateway Metric
Enter the metric for the gateway here.
4.3.3.1.1.3. Physical Settings
The following parameters are available in this section:
Parameter
Description
Bridge Interfaces
Select this option to bridge this interface with another interface.
Enable STP
Note:
This option is only available if Bridge interfaces are enabled.
Interface
If desired, select and enter a Custom Interface name in the textbox provided.
Note:
Multiple selections are only available when the Bridge interfaces option is
selected. Normally, only one interface can be selected here.