background image

zBoost

®

 Xtreme REACH ZB560SL Manual

zBoost

®

 Xtreme REACH ZB560SL Manual

i

ii

FCC Requirements

This is a CONSUMER Device.

BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your 
provider’s consent. Most wireless providers consent to the use of signal boosters. AT&T, Sprint, 
T-Mobile, Verizon and 90 additional carriers have already given consent for all consumers to use 
this device. Some providers may not consent to the use of this device on their network. If you are 
unsure, contact your provider.

You MUST operate this device with approved antennas and cables as speci

fi

 ed by the 

manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.

You MUST cease operating this device immediately if requested by the FCC or a licensed wireless 
service provider.

WARNING. E911 location information may not be provided or may be inaccurate for calls served by 
using this device.

FCC contact information: 

www.fcc.gov/signal-boosters/registration.

 Warning

Any product modi

fi

 cations that use unauthorized 

antennas, cables, and/or coupling devices is no longer 
FCC compliant and will void the product warranty.

FCC Information

FCC ID: SO4ZB570-PCS-CEL

Warning: 

Changes or modi

fi

 cations to this device not expressly approved by zBoost could void the 

user’s authority to operate the equipment.

Note: 

This equipment has been tested and found to comply with the limits for a Class B digital 

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential installation. This equipment generates, 
uses, and can radiate radio frequency energy and, if not installed and used in accordance with 
the instructions, may cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If the equipment does cause 
harmful interference to radio or television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to correct the interference by one or more of the 
following measures:

• 

Reorient or relocate the receiving antenna

• 

Increase the separation between the equipment and receiver

• 

Connect the equipment to an outlet on a circuit different from that to which the receiver is 
connected

• 

Consult the dealer or an experienced radio/TV technician for help

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled 
environment. This transmitter must not be co-located or operating in conjunction with any other 
antenna or transmitter. In accordance with FCC requirements of human exposure to radiofrequency 

fi

 elds, the radiating element (antenna) shall be installed such that a minimum separation distance of 

20cm (8in) is maintained from all persons.

Industry Canada Regulations

IC ID: 5544A-ZB570PCSCEL

This Class B digital apparatus meets all requirements of the Canadian Interference Causing 
Equipment Regulations. Operation is subject to the following two conditions: (1) this device may not 
cause harmful interference, and (2) this device must accept any interference received, including 
interference that may cause undesired operation.

The term “IC:” before the radio certi

fi

 cation number only signi

fi

 es that Industry Canada technical 

speci

fi

 cations were met.

RF Exposure: The manufacturer’s rated output power of this equipment is for single carrier 
operation. For situations when multiple carrier signals are present, the rating would have to be 
reduced by 3.5 dB, especially where the output is re-radiated and can cause interference to 
adjacent band users. This power reduction is to be by means of input power or gain reduction and 

About zBoost

®

zBoost

, a leader in cell phone signal boosters manufactures zBoost, the award-winning line of 

cell phone signal boosters that enhance the performance of your cell phone, smartphone and 
wireless data card.

Compatibility – 

Dual Band zBoosts are compatible with 800 MHz and 1900 MHz regardless of 

technology- including CDMA and GSM.

Uses patented technologies and protects the carrier network.

2-year manufacturer warranty – Warranty registration at 

www.zBoost.com

.

Summary of Contents for Xtreme Reach ZB560SL













Reviews: