background image

zBoost

®

 Max ZB545M Manual

i

FCC Requirements

This is a CONSUMER Device. 

BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your 

provider’s consent. Most wireless providers consent to the use of signal boosters. AT&T, Sprint, 

T-Mobile, Verizon and 90 additional carriers have already given consent for all consumers to use 

this device. Some providers may not consent to the use of this device on their network. If you are 

unsure, contact your provider.

You MUST operate this device with approved antennas and cables as specified by the 

manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.

You MUST cease operating this device immediately if requested by the FCC or a licensed wireless 

service provider.

WARNING. E911 location information may not be provided or may be inaccurate for calls served by 

using this device.

FCC contact information: 

www.fcc.gov/signal-boosters/registration.

 Warning

Any product modifications that use unauthorized 

antennas, cables, and/or coupling devices is no longer 

FCC compliant and will void the product warranty.

Summary of Contents for Max ZB545M





















Reviews: