Setup
Please read through these instructions before setting up.
Please switch your radio OFF
Locate the ACC/CAT port on the rear of your radio.
It is an
8 pin
Mini-DIN
socket. Carefully line up the plug of the BlueCAT,
and insert. Do not force the plug in, as this may damage it, and your
radio. Do not twist the plug! Please check carefully that you are
connecting to the correct socket.
If you are unsure as to the location of your CAT port, please consult your
radio owner’s manual. If you purchased the 4800 baud option, and wish to
use BlueCAT with an LDG YT100 Autotuner, please connect BlueCAT to the
port marked ‘Computer’ on the YT100, and connect the YT100 as normal.
Switch your radio ON
For the FT-817
