Select menu 14 [CAT RATE]
This sets the transceiver's circuitry for the CAT baud rate.
Options available are 4800/9600/38400 bps
Set it to 38400 bps.
N.B. If you purchased the 4800 baud option, set it to
4800bps
For the FT-857 and FT-897
Select menu 020, [CAT/LIN/TUN]
This selects the device which is connected to the CAT/LINEAR jack
on the rear panel.
Options available are CAT/LINEAR/TUNER
Set it to CAT
Select menu 019 [CAT RATE]
This sets the transceiver’s circuitry for the CAT baud rate to be
used.
Options available are 4800 bps/9600 bps/38400 bps
Set it to 38400 bps.
N.B. If you purchased the 4800 baud option, set it to
4800bps
Select menu 059 [MIC Sel]
Options available are NOR/CAT/RMT used.
Set it to NOR.
Select menu 085 [Tuner/ATAS]
Options available are Tuner/ATAS/OFF
Set it to OFF.
The BlueCAT should now be showing a flashing light, and you are ready to
proceed to the next step.
