Zaxcom ZFR400 Setup Menu
20
OLED Brightness Adjust
This setting adjusts the brightness of the OLED display. The brightness setting is from 0 to 3 with 3 being the
brightness.
OLED Display Dim
This setting adjusts the brightness of the OLED display. The brightness can be set from 0 to 3 with 3 being the
brightest and 0 the dimmest.
Information Page
This page displays the current firmware version, the serial number, the DSP version, and the option code.
Hide Encryption Menu
This setting will hide the encryption menu. A hidden encryption menu allows for quicker navigation and
prevents accidental changes.
HIDDEN
- The encryption menu doesn’t appear when cycling through the menu settings.
DISPLAYED
- The encryption menu will appear.
Encryption Code Set
If an encryption code is set the ZaxNet transmitted audio will be encrypted and can only be listened to if
the receiver has the matching encryption code entered. When receiving an audio signal and the codes do
not match, all that will be heard is white-noise or silence. So if using encryption it is important to make
sure the matching receiver has the same code.
These two sets of numbers are formed into a single six-digit encryption code which provides a total of
16,777,216 possible combinations.
Please note that both of these codes should be set to 000 for normal un-encrypted operations
Adjusting the encryption code
1. Momentarily press the MENU key to advance to the next character.
2. To change the designated character, press the INC or DEC key.
3. To exit this page, press and hold the MENU key for 1 second.
ENCRYPTION MENU:
ON
- - - INFO - - -
FIRMWARE V2-03
SN: 1234 DsP:1B (ZHD)
OPT = 03
ID1: 000 ID2: 000
OLED BRIGHTNESS:
3
DISPLAY DIM:
OFF (NORMAL)
