Zaxcom ZFR400 Record Menu
12
Recording Mode Set
Record mode sets what the ZFR400 will do after the card is full.
NON-LOOP RECORD
- Once the card is full the recording will stop and FULL will be displayed. This setting
prevents over-writing any portion of the audio.
LOOP RECORD
- Once the card is full, the new audio will begin over-writing the oldest audio on the card.
Please note that regardless of the record mode setting the card can only record 500 files.
Low Battery Stop Set
Low battery stop will set the amount of time, after a low battery warning occurs, the ZFR400 will close the
current file and stop recording.
This is to prevent possible file corruption if the unit constantly powers off and on due to a dead battery.
NEVER STOP
- The onboard recorder will not stop recording unless it is manually stopped by a key press, or
when it receives a stop command via ZaxNet or if the battery dies.
Any interval from 1 to 99 minutes
- Once the battery indicator starts blinking the ZFR400 will continue to
record for the time set here - then the ZFR400 will close the file and stop recording.
RECORD MODE:
LOOP RECORD
LOW BATT STOP:
NEVER STOP
