Zaxcom TRXLT3, User Manual

Page: 20 / 35

Zaxcom TRXLT3 Setup Menu
20
SETUP MENU
Test Tone




The TRXLT3 has an internal tone generator which will generate tone so the signal chain can be properly gain
staged. From this menu pressing the INC key will turn on the tone generator and cycle through the tone
options which are 500Hz at -20dBFS, 1000Hz at -20dBFS or 500Hz at full scale.
Battery Type Set
This menu is where the TRXLT3 battery type is set so the receiver can properly display the remaining battery
capacity. The settings are NIMH, Lithium and Alkaline (Displayed as “ - - - -“). There is also an option for “ENG”
and “QRX” – this is to accommodate different Zaxcom receiver models (“ENG” RX900) or (“QRX” QRX).
Standby Mode After Boot Up
This menu sets what power mode the TRXLT3 boots up to.

NORMAL MODE - The transmitter will boot up normally.

STANDBY MODE - The transmitter boots up in low power standby mode. The transmitter will be waiting for
a manual press the of the MENU key to come up to full power.

REMOTE STANDBY - The transmitter boots up in low power standby mode. The transmitter will be waiting
for a ZaxNet “WAKE” command to come up to full power.
Key Lock On Boot Up
This menu sets what happens to the keys on the face of the TRXLT3 after boot-up.

LOCKED - After boot-up has completed, the transmitter will automatically go into lock mode and the keys
will be locked to prevent accidental changes to the settings.

UNLOCKED - After boot-up the keys will remain unlocked. In unlocked mode the keys can still be locked
going in to the lock screen in the main menu and wait 5 seconds.
To unlock the keys at any time - simultaneously press the MENU and INC key 5 times.
BATTERY TYPE:
LITHIUM QRX
STANDBY BOOT MODE:
NORMAL MODE
KEY LOCK ON BOOT:
UNLOCKED
TEST TONE: ON
I I I