Zaxcom Digital Wireless System User’s Manual______________________________________Chapter 11
83
Version 5.62g: 2008-10-23
Added
MUTE switch option
Changed
a RED LED also means MUTE
Changed
lock screen now locks out the transport buttons as well as the INC, DEC, MENU buttons
Added
DYNAMICS
screen
Added
theatrical mod support
Fixed
FORMAT_CARD to fix last wrapper file size corruption
Fixed
removed several useless menus from IFB products
Changed
renamed menu item LED Reverse to Hardware Options
Changed
extended GAIN range from 0 – 38 dB to 0 – 52 dB
Changed
allow US_MONO_R format with a hand held mic (for new audio board mod)
===================================================================================================================
Version 5.53: 2008-07-15
Added
support for high capacity SD cards (4GB and higher) and more support for other smaller cards.
------- SD CARD WARNING -------
This change could possibly cause some older cards to stop working. If you upgrade to this version and find that your brand of SD card no
longer works, you may need to use another brand of SD card to downgrade to an older version.
===================================================================================================================
Version 5.51: 2008-05-21
Fixed
recent IFB jam bug (could cause timecode to stop)
===================================================================================================================
Version 5.50a: UNKNOWN
Changed
re-wrote IFB audio codec (sounds less crunchy)
------- IFB WARNING -------
Starting with this version’s firmware, the IFB audio transmission format has changed. To maintain IFB audio compatibility, both the IFB
transmitter(s) and the audio transmitter(s) must be loaded with this version or higher.
===================================================================================================================
Version 5.36a: 2008-05-13
Changed
Reversed cursor direction in the OPT and IDCODES screens
Fixed
bug in OPT screen
===================================================================================================================
Version 5.34a: 2008-04-23
Added
IFB100 - always allow IFB POWER SELECTION screen in the Extended Menu
Disabled
IFB100 – EXPANDER and IDCODES screens
===================================================================================================================
Version 5.33c: 2008-04-21
Added
TIMECODE OUTPUT ENABLE screen
Added
New user power level settings for high power RF boards
Moved
EXPANDER screen to bottom of extended menu
Added
TRX990 - separate Left and Right gain setting
Fixed
TRX990 - a new gain problem in Mono mode
Changed
TRX990 - GAIN-L to GAIN-1
Changed
TRX990 - GAIN-R to GAIN-2
Fixed
IFB100 - IFB power setting to work above power level 3
===================================================================================================================
Version 5.33b: UNKNOWN
Fixed
TC Reader no longer jams on seconds boundary
===================================================================================================================
Version 5.33a: UNKNOWN
Changed
Loosened jam requirements
===================================================================================================================
Version 5.20: 2008-03-07
Added
Higher
resolution transmit waveform to increase TX range
===================================================================================================================
Version 5.19: 2008-02-29
Added
Timecode
display in LOCK screen
Added
Timecode debug codes to DBG screen
Fixed
23/24/25 fps TC reader problems
Fixed
Transmitter’s name initialization (was always NLD by default now it's SN#####)
===================================================================================================================
Version 5.17: 2008-02-18
Fixed
Timecode problem with 23.98, 24 and 25fps timecode. This was causing autoload to trigger several times in a take. This version should be
used in an IFB transmitter if using the wireless autoload feature
