Zaxcom Digital Wireless System User’s Manual_______________________________________Chapter 2
25
Common Transmitter Standard Menu
Normal Startup Sequence (without any card inserted)
LCD
SYNTH AB
LOWER POWER MODE
IFB IS OFF 0
PCB REVB 0150
VER #-### (03)
***NO CARD***
NAME:
CCCCCCCC
ZAXCOM V#-###
TRX900 SN:#####
LOW BATTERY
1.60V
581.6
??H
STOP
(Optional entry – only occurs if Low Power mode is fully enabled.)
(
PCB REV B
– indicates the printed-circuit board is revision “B”.)
(
#–###
– indicates the currently installed firmware version.)
(
0150
– Programmable logic device revision code. ‘0000’ means no
timecode input available.)
(
CCCCCCCC
– displays the “Name” entered in the Extended Menu.
The default is “
SN:
” followed by the unit serial number.)
(
#####
– indicates the transmitter’s serial number, hardwired into the
printed-circuit board.)
(This screen appears when the battery has to be changed.)
(Be aware, if you get either alert, the unit may not go into Record mode.)
(The outline of the battery symbol starts blinking when the voltage reaches
a low level.)
