Direct Access Keys Media Menu / Primary Card
36
ISO Attenuation
The NeverClip™ inputs allow large signals to travel through the digital mixing engine using 32 bit floating point
numbers. Once these large signals are recorded into a 24-bit WAV (or MARF) file, the advantage of floating
point math is lost and these signals can clip if not using a card limiter.
ISO Attenuation allows the ISO record tracks to be attenuated by a user selectable amount of 6, 12, 18 or 24
dBs. This allows audio to be recorded unclipped even if its dynamic range would normally be too large. This
gain reduction amount is stored in the metadata of the WAV file so post production can restore the amplitude
of the ISO tracks when necessary.
ISO Attenuation Enable
The ISO attenuation matrix is where the card record tracks that will be attenuate are been enabled.
A cross point with an “X” will designate that the track will be attenuated.
Edit Current Folder Name
Each record folder can be named to identify its contents.
A folder name can be up to 19 alpha numeric characters and cannot contain any spaces or symbols.
Editing a Folder Name
1.
Scroll down to the Edit Current Folder Name.
2.
Press the MENU knob to access the on screen key board.
3.
Using the keyboard name the folder.
