Chapter 10______________________________________Zaxcom Digital Wireless System User’s Manual
78
Chapter 10
– Wiring Diagrams
NOTE:
All of the diagrams in this chapter show the solder side of each connector.
IMPORTANT:
The reason for the break on serial #, transmitters before #1315 do not have a bias resister
installed. To have a mic work with them it is necessary to include it.
TRX900 ( /AA) Microphone Cables (before serial # 1315)
The following 3-pin micro-LEMO connectors mate with the microphone connector:
•
FGB.00.303.CLAD.22 – has a latch with pull release.
•
FVB.00.303.NLA
– has a latch with a twist release.
Figure 10-1 Two-wire microphone configuration (previous transmitters)
Figure 10-2 Three-wire microphone configuration (previous transmitters)
Figure 10-3 Balanced Line to TRX900 ( /AA)
