Chapter 5_______________________________________Zaxcom Digital Wireless System User’s Manual
58
RS-485 Unit Identifier page
RxNum=01
Page purpose:
This page maintains the number used to uniquely identify this receiver.
Parameters:
[value range:
0
to
99
, step:
1
]
This identifier is used by a 3
rd
party program called ZedAlpha (
http://www.orbitalsound.co.uk
). This program
can monitor each receiver using RS-485 commands.
RS-485 Communication Speed page
BAUD 192
Page purpose:
This page controls how fast the RS-485 signals are transferred.
Parameters:
•
192
– 19,200 bps
•
384
– 38,400 bps
384
is a little unreliable; always use
192
.
Left/Right Switch page
LRSW:Off
Page purpose:
This page controls or enables output switching when used with the private line communications
feature of the TRX9xx & TRX800.
Parameters:
•
Off
– whether or not the button on the transmitter is pressed, the receiver will output the same audio on
both channels from the transmitter
•
On
– when the button is not pressed the output will appear on the left channel and when the button is
pressed the audio is appears on the right channel
This function will not work while the unit is in stereo.
Preset Frequency pages (# = 0 to 9)
p# 560.0
Page purpose:
Use these pages to store frequently used frequencies.
Parameters:
Character 1 – Valid Signal
Changes from
p
to
P
when it receives a valid signal.
Character 2 – Preset Identifier
(value range:
0
to
9
, step:
1
) identifies the preset storage.
Character 4 to 8 – Receiver Frequency
[value range: (see
Table 1.3
), step:
.1
] These characters display the currently selected frequency in MHz.
Use the
INC
or
DEC
key to change this frequency.
Between these pages, 10 frequencies can be stored. They appear before the lowest frequency on the
Audio
Receiver Frequency Select page
.
