Use Alarm Buffer
:
Select
Use alarm buffer
when you forward the image / audio of
before and after the alarm detection (pre-alarm, post-alarm). If you do not select it, only
the image of the moment of the alarm detection is forwarded. Click
Alarm buffer
to
display the Alarm buffer setting menu.
Note:
You can set the alarm buffer function at alarm buffer page. (Please go “Setting
→
Advance
→
Alarm buffer
→
Setting”) For more details, you can check Chapter 7.7.
Parameter:
the parameter of CGI (defined in URL of HTTP
→
General) is
from your target device. For example, move=down.
Message:
message will show up in the form of Message = PTZ down. If your
target device didn’t support the parameter of message, you can’t see the
message. So you can just take the message as a note. For example: PTZ
down.
73
Summary of Contents for N6031
Page 1: ...N6031 User Manual 0 ...
