Authentication
:
Select the authentication required when you send an email.
Off: Select if no authentication is necessary when an email is sent.
On: When authentication is necessary an e-mail is sent, there are
SMPT, POP before
SMPT or both
three options.
SMTP:
Select if SMTP authentication is necessary when an e-mail is sent.
POP before SMTP
: Select if POP before SMTP authentication is necessary when an
e-mail is sent.
POP server name
:
It is necessary when the
POP before SMTP
is selected in
Authentication
. Type the POP (receiving mail) server name up to 64 characters, or
type the IP address of the POP server. This setting is necessary when the SMTP server
which sends e-mails performs authentication using the POP user account.
User name, Password
: Type the user name and Password of the user who has the
mail account. This setting is necessary when the SMTP server which sends e-mails
performs authentication.
Recipient e-mail address
: Type the recipient e-Mail address up to 64 characters. You can
specify up to three recipient E-mail addresses.
Administrator e-mail address
:
Type the Administrator e-Mail address up to 64
characters. This address is used for reply mail and sending system messages from the SMTP
server.
Subject
: Type the subject/title of the e-Mail up to 64 characters. With respect to mail
which is sent according to the IP notification.
Message
:
Type the text of the E-mail up to 384 characters. Default value provides
network information including IP, Port, MAC, Model, Firmware Version and Web Version.
45
Summary of Contents for N6031
Page 1: ...N6031 User Manual 0 ...
