SECTION 6 - MAINTENANCE
29
Zator
Via Galvani, 11 - 20095 - Cusano Milanino (MI) - Italy
www.zator.it - [email protected]
6.5
Needle disassembly
6.6
Needle assembly
To disassemble the needle and/or replace the spring kit, proceed as
follows:
Extract the snap ring that keeps the
spring compressed with the help of a
small screwdriver;
Finally insert the snap ring with the
help of a smooth plier*.
Insert the washer in the needle being
careful to the assembly direction;
Pull out the spring from the needle;
Insert the spring in the needle;
Finally pull out the washer.
1
3
1
2
2
3
!
*Pay attention to not scratch
and/or bend the needle with the
plier.
