SECTION 6 - MAINTENANCE
31
Zator
Via Galvani, 11 - 20095 - Cusano Milanino (MI) - Italy
www.zator.it - [email protected]
Insert the needle inside the guide
sleeve;
Screw* the nozzle with a 10mm
wrench
Insert the coil connector;
Finally screw the coil connector
screw.
4
5
6
7
10
*Before screw the nozzle, check the micrometric adjustment
handle is completely loosened to avoid damage to the nozzle
and needle. To loosen the handle, turning it counter-clockwise
until it doesn’t resist anymore.
