5
English
How to chop food
1. Place the glass bowl on a counter or other flat surface, and then install the blade
combination on the spindle at the bottom of the glass bowl. (Note: Do not touch the
blade part because it is very sharp.)
2. Put the food into the glass bowl, please refer to the chopping guidelines to get the
ideal food condition.
3. Close the bowl cover, and then unscrew the bottom of the motor assembly (as
shown below).
Place on the corresponding position of the bowl cover, the convex point on the bowl
cover will match the small hole combined with the motor, and adjust the alignment with
reference to the locking label on the motor combination and the bowl cover until the
motor combination is locked.
4. Press the button for shredding.
Note: This product has only one button. If you choose 250g beef without gluten, please
avoid directly running the motor for more than 30 seconds. Please use the illustrated
time to work.
5. Please make sure that the blade stops completely before opening the bowl cover.
Unplug the power plug, pick up the motor assembly, then grasp the plastic bracket part
of the blade assembly and lift the blade assembly. Pick up the glass bowl and pour out
the food. Please do not use this glass bowl for food storage.
How to make juice
1. Put appropriate amount of fruit, water or milk in the accompanying cup, and then
tighten the knife holder of the accompanying cup.
2. Open the upper cover of the motor assembly (as shown below).
Place the entire escort cup assembly with the escort cup cutter holder screwed on the
upper part of the motor assembly and screw it.
3. Press the button for juice processing.
Summary of Contents for ZMCH 02
Page 2: ...1 2 3 4 7 8 9 6 5...
