background image

Preface

Thank you for purchasing The Zartek ZA-758 Portable 

Two Way Radio. This radio is easy to use and gives 

you reliable and clear communication. The ZA-758 

UHF transceiver operates on both license-free bands 

namely 464 MHz consisting of 5 frequencies and 

446MHz consisting of 8 frequencies.  

Please read this manual carefully before using the 

radio. The information presented here will ensure that 

you get maximum performance and functionality from 

the radio. There are also important battery and 

charging maintenance procedures.

High strength materials and quality components have 

been used in the manufacture of this two-way radio to 

give many years of product use. It is designed for 

rugged outdoor and industrial use to excel in tough 

environments. The ZA-758 radio is compact with a 

short stubby antenna for easy handling. Li-ion battery 

technology and VOX (voice activation) are included 

amongst many features that enhance performance yet 

keep the transceiver easy to operate. A detachable 

antenna enables external car or house antennas to be 

used with the radio to extend communication range.

Warranty

There is a 12 month factory warranty on the unit. 

Warranty does not cover speakers, battery or 

accessories. The product must be used for the 

intended purpose and not subject to willful or 

accidental damage. If the product has been tampered 

with in any way, the warranty shall be considered null 

and void.

PROFESSIONAL TWO-WAY RADIO

PROFESSIONAL TWO-WAY RADIO

33

CTCSS FREQUENCY TABLE (50)

DCS CODES TABLE (104)

Summary of Contents for ZA-758




















Reviews: