background image

PROFESSIONAL TWO-WAY RADIO

15

distances will be. Generally you can talk to wherever you can see, which is 

why the coverage in a valley is much less than the coverage from on top of 

a hill. 

 Ensure that there is nothing blocking the antenna. The less metal in close 

proximity (0-2m) the better the range. There may be external interference 

from electrical equipment (power lines or factories) or natural causes 

(moisture in the air or storms) that may vary depending on the location and 

the weather.

PROFESSIONAL TWO-WAY RADIO

16

PROGRAMMING (OPTIONAL)

A programming cable is needed to program different channels or 

functions on the ZA-758. The programming cable links the radio 

to USB port on a PC or laptop. 

USB installation: 

USB cable driver software for your computer operating system is 

available for free downloading from www.zartek.co.za or from the 

cable manufacturer website Prolific (driver for PL2303 USB-Serial 

cable). Install the correct software and plug in the cable to the 

PC. The computer should locate the cable and configure it 

automatically. You can check that the cable is working by locating 

it in DEVICE MANGER > PORTS > PROLIFIC USB – SERIAL 

COMM PORT

Software installation:

Programming software for the ZA-758 is available for free 

download from www.zartek.co.za . Install the software on to a PC 

by following the installation steps. Once installation is finished, an 

icon called “ZA-758 User PC Software” will appear on the screen.

Connect the USB cable to the PC and plug in the twin connector 

into the speaker/microphone jack on the side of the ZA-758 radio. 

Ensure that there is a charged battery connected to the radio and 

switch the radio on. Start the program and a window will appear. 

The software automatically finds the correct port of the 

programming cable.

Summary of Contents for ZA-758




















Reviews: