5
en
The operator bears sole responsibility for ensuring:
• that the safety regulations are adhered to,
• that improper use (see Section 1.8), faulty setting up and impermissible operation
are excluded and thus
• ensuring that the equipment is put to its intended use (see Section 1.7) and
• that the scaffold units are operated in accordance with the application conditions
defined in the contract.
1.5 Date of issue
The date of issue of these English assembly and usage instructions is
01 September 2016.
1.6 Copyright and trademark rights
The copyright to these assembly and usage instructions lies with the manufacturer.
The manufacturer also reserves all further rights, in particular in the case of the
granting of a patent or utility patent registration.
Any infringement of the conditions described above will result in liability for
damages!
1.7 Intended use
The scaffold units listed in these assembly and usage instructions may only be used
as scaffolding in accordance with the stipulations of EN 1004 and the overview of
models in these assembly and usage instructions.
1.8 Improper use
Misuse - that is, any use of the scaffold units documented in these assembly and
usage instructions which deviates from that described in Section 1.7 - shall be
deemed improper use as defined by the Product Safety Act.
This also applies to failure to observe the standards and guidelines listed in these
assembly and usage instructions.
Summary of Contents for Z600 S-PLUS
Page 2: ...2...
Page 44: ...44 5 Notes...