zarges Z 600 S-PLUS, Assembly And Usage Instructions

Page: 34 / 44

Assembly and usage instructions
34
3. Stability specifications
3.1. General information
Stabilisers are responsible for the stability of the scaffold. However, these must also be ballasted
according to the area of deployment (indoors / outdoors). For the correct ballasting, please see
the parts lists (packet 2.10). For scaffolds, which used the extension for stabilisers no ballast
weights needed.
3.2. Fastening the ballast weights (only for 53769)
The attachment location and the quantity of the ballast
weights depend on the type of assembly and platform
height of the scaffold. For the precise quantity of the
ballasting, please see the parts lists in section 2.9
(lower portion of the tables)
For scaffold with stabilisers, screw-on ballast weights
must be used (order no. 42912). The ballast weights
must be fastened to the stabilisers (if possible on the
base point).
3.3. Fix the anti-twist protection (42865)
To prevent rotation of stabilisers please use anti-twist protection 42865 (see page 37).
Fix the one end of the protection at the stabilisers, the other end at the first rung of the folding
frame unit.
3.4. Maintenance, repair, storage and cleaning
Clean the scaffold with water and commercial cleansers. If paint gets on the scaffold, it can
be removed with turpentine. Cleansers may not penetrate the soil; used cleansers must be
disposed of in accordance with the applicable environmental regulations.
Greasing the moving parts
Grease all moving parts (spindle, swivel castor bearing, catches) with commercial oil. For use
in the winter, use low viscosity oil. Wipe off excess oil, the oil may not reach the treads - danger
of slipping. Dispose of cleaning rags soiled with grease in accordance with the applicable
environmental regulations.
Storage
Storage must be in a manner such that damage to the unit is excluded. The scaffold components
must be stored so that they are protected against the effects of weather. During transport to
or from the storage location, the scaffold components must be secured against slipping and
bumping as well as falling down. When loading, the scaffold components may not be thrown.
Ballast weights
Order no.: 42912