4
1 General information
1.1 Introduction
These assembly and usage instructions apply exclusively to the scaffold units
described therein.
The notes on safety and the rules and regulations for handling scaffold units apply
to the scaffold towers referred to in this documentation.
The operating companies accept responsibility for the following points:
• adherence to local, regional and national regulations
• observance of the regulations (laws, ordinances, guidelines etc.) for safe handling
listed in these assembly and usage instructions
The operating company must ensure that the assembly and usage instructions are
available to the operating personnel and that the instructions, information, warnings
and safety regulations they contain are strictly observed.
If you require further information or if specific problems occur which are not
covered in sufficient detail in these assembly and usage instructions, please contact
the manufacturer directly (see Section 1.2).
1.2 Manufacturer
ZARGES GmbH
Tel.: +49 8 81 / 68 71 00
Fax: +49 8 81 / 68 72 95
PO Box 16 30
Email: [email protected]
D-82360 Weilheim Internet: http://www.zarges.de
1.3 Type approval
The scaffold units described below have been tested by TÜV Süd (German Technical
Control Board South).
1.4 Warranty
The scope, period and form of the warranty are stipulated in the manufacturer's
sales and delivery conditions. The assembly and usage instructions valid at the time
of delivery apply to all warranty claims arising from insufficient documentation.
The following applies above and beyond the sales and delivery conditions:
the manufacturer accepts no liability for damage to the scaffold units arising from
one of more of the following:
• ignorance of or failure to observe these assembly and usage instructions
• insufficiently qualified or instructed operating personnel
• the use of parts other than original spare parts.
Summary of Contents for MultiTower S-PLUS 1T
Page 2: ......