zarges 41286, Instructions For Assembly And Use, Page: 8 / 50

8
3.2 Type testing The fixed ladder systems described below are type-tested and registered.
The fixed ladders and platforms meet the requirements of DIN 18799-1, DIN 14094-1
and EN ISO 14122.
3.3 Scope of delivery
The scope of delivery is customer-specific and depends on the individual order.
• Before starting assembly of the product, check that all components listed in the
order confirmation and on the delivery note have been supplied and are in perfect
condition. Use only original parts in perfect condition to assemble the product.
3.4 Identification • Type plates
> For identification of the specific model supplied, see the type plate. Type plates are
attached to all main components of the fixed ladder system. The illustration shows
the type plate of a fixed ladder, 1.96 m, hot-dip galvanised steel.
• Product decals
> All product decals must remain attached to the product.