H2B USER'S MANUAL - 550145G
Page 21/60
ing time parameter.
SOFT BRAKING
On
No Soft braking.
Off
Soft braking activated.
AUX FUNCTION
none
No Aux function.
bimotor contactor
AUX G7 output is activated
when turning from off status to running status and at
the beginning of regenerative braking, and it is
switched off when PWM is greater than 20%, both
statuses.
hydrocontactor
The output AUX G7 com-
mands the hydrodrive contactor. It should be active
during both forward and backward directions and
during release braking. The turning OFF delay is
programmable at "AUXILIARY TIME".
HYDRO KEYON (H2G softw.only)
On
Hydrodrive activation at key-
on. Activation time is defined
by param. AUXILIARY TIME.
Off
Hydrodrive disable at key-on.
MAIN CONTACTOR
present
Main contact. present on G5.
running status
G5 is ON during functions
(except descent).
- SELECTION OF BATTERY VOLTAGE: ADJUSTMENT MENU
Makes it possible to set the nominal voltage of the battery for handling the charge status
and tester functions.
With "BATTERY TYPE" it is possible to select the nominal voltage.
With "ADJUST BATTERY" it is possible to make a fine adjustments of battery voltage.
- SPECIAL ADJUST
PARAM CHANGE EN (H2G softw.only) On
Parameters modification is
allowed.
Off
Parameters are locked.
Modification is not allowed.
AUX FUNCTION #1(Only traction)
On
Load H.M. from Mdi.
Off
No load of H.M. from Mdi.
ADJUSTMENT #1 (Only traction)
0 ... 9
Set the maximum of the battery
discharge curve.
ADJUSTMENT #2 (Only traction)
0 ... 9
Set the minimum of the battery
discharge curve.
SET TEMPERATURE
Fine adjustment of the chopper
temperature.
- HARDWARE SETTINGS
SET CURRENT
Sets the current for tester to 400A
or 600A.
