H2B USER'S MANUAL - 550145G
Page 17/60
4 PARAMETER MODIFICATIONS
Modification of the parameters, in addition to the configuration of the inputs, is made di-
rectly by ZAPI on customer specifications, or the customer may make adjustments himself
using the programming console. The console can remain connected to the chopper when
running and the parameters can also be varied in real time during operation.
To confirm data, press ENTER when requested by the message on the console.
The parameters thus modified and optimised on one unit can be stored from the console
(SAVE) and then reloaded (RESTORED) on another chopper, thus allowing fast and
standardised calibration (see console manual for details).
In H2G software version, parameters modification and PROGRAM VACC function are
locked by default. To enable them, special adj. PARAM CHANGE EN must be set to ON.
Pay special attention to the polarity of the console connector when it is hooked up to the
chopper.
HOOKING UP MUST ONLY BE DONE WITH THE MACHINE OFF.
4.1 MODIFYING PARAMETERS USING THE DIGITAL CONSOLE
The digital console displays the model type and its built-in hourmeter.
-
SET MODEL:
REGENER
NOT CONF
STANDARD PUMP
PUMP + HYDRO
-
SET OPTIONS (TRACTION):
BYPASS CONTACTOR
bypass / weakening cont
SPEED CONTROL
on / off
BATTERY CHECK
on / off
ANTIROLLBACK
on / off
RELEASE BRAKING
on / off
HOUR COUNTER
running / keyon
QUICK INVERSION
on / off
SAFETY SWITCH
seat / handle
BACKING FUNCTION
on / off
SOFT BRAKING
on / off
AUX FUNCTION
none / bimotor
contactor / hydrocontactor
HYDRO KEYON (*)
on/off
-
SET OPTIONS (PUMP):
BATTERY CHECK
on / off
BYPASS CONTACTOR
bypass / weakening cont
HOUR COUNTER
running / keyon
MAIN CONTACTOR
present / running status
