Page - 52/79
AF6ZP0AL - COMBIAC0 & ACE0 - User Manual
4
NOTE: in reality the SAVE and RESTORE function requires the Windows PC-
Console.
11.2 Description of console “RESTORE” function
The RESTORE PARAM function allows transfer of the Console’s stored data into
the memory of the controller. This is achieved in a fast and easy way using the
method previously used with the SAVE PARAM. function.
The data that is available on the RESTORE PARAM. Function are listed here
below:
-
All Parameter Values (PARAMETER CHANGE).
-
Options (SET OPTIONS)
-
The level of the Battery (ADJUST BATTERY)
ATTENTION: When the RESTORE operation is made, all data in the controller
memory will be written over and replaced with data being restored.
Flow Chart showing how to use the RESTORE function of the Digital Console.
Opening Zapi Display
CA0Z2A ZP1.00
24V 200A 00000
Press ENTER to go into the General menu
' % '
' ' '
The Display will show :
MAIN MENU
PARAMETER CHANGE
Press ROLL UP or ROLL DOWN button until
RESTORE PARAM. appears on the display
% ' '
% ' '
The Display will show :
MAIN MENU
RESTORE PARAM.
Press ENTER to go into the RESTORE PARAM.
function
' % '
' ' '
The Display shows the type of Model stored, with a
Code Number
SELECT : MOD. 00
ACE0 ZAPI V1
Keep pressing either ROLL UP and ROLL DOWN
buttons until the desired model appears on the
Display
% ' '
% ' '
SELECT : MOD. 00
ACE0 ZAPI V1
Press ENTER to commence the Restore operation
' % '
' ' '
The Display will ask “ARE YOU SURE”.
ARE YOU SURE?
YES=ENTER NO=OUT
