11
2)
Enter the required value of coordinate, using the numeric keypad (
[DEL]
– Deletes the entered
character;
[ESC]
– Cancels the option of entering a value).
3)
Accept the entered value, by pressing
[ENT]
.
4)
Declaration of coordinate for another axis – go back to item 1.
5)
Confirm the declared coordinates, by pressing
[F1]
“
Accept
”.
The following keys are available, when this function is carried out:
[F2]
“
Reset
”
:
It enables resetting operator's coordinates.
2.2.2
A list of base coordinates
Intended use:
This function enables assigning physical coordinates corresponding to the current location of the
working bit of the machine to one of the G-codes within the following range: G50-G59.
Access path:
Manual Mode [R] -> Configuration of coordinates -> List of base coordinates
Screen:
Course of action:
1)
Select an axis (an appropriate G-code) to which you intend to assign the current value of a
corresponding physical coordinate.
o
The selected axis is displayed with an intersection, in relation to the edge of the column.
o
To navigate through the list of base coordinates, use the block of navigational keys (see Fig. 3). See
below to learn about the operations assigned to each of the keys:
[1]
[
↑
]
The cursor moves up to another item on the list;
[2]
[
↑
]
The cursor moves down to another item on the list;
[3]
[
↑
]
The cursor moves to the left item on the list;
[4]
[
↑
]
The cursor moves to the right item on the list.
2)
Assign a value to the physical coordinate, by pressing
[ENT]
.
o
The value set for the selected coordinate will change.
3)
Declaration of coordinate for another axis – go back to item 1.
4)
Confirm the declared coordinates, by pressing
[F1]
“
Accept
”.
2.2.3
Physical coordinates
Intended use:
This function enables changing values for each of the physical coordinates. Consequently, the
datum point corresponding to the global co-ordinate system is changed.
Access path:
Manual Mode [R] -> Configuration of coordinates -> Physical coordinates
