Zanussi ZYB 594, User Manual

Page: 8 / 20

3. When Rapid heat up is completed, an acoustic signal
sounds and "FHU" goes out.
At this time the appliance continues to heat in the set
oven function and oven temperature.
4. Put the food in the oven.
Clock functions
Clock function Application
Time of day Shows the time. To set, change or check the time.
Minute minder To set a countdown time.
A signal sounds, after the time period is completed.
This function has no effect on the operation of the oven.
Duration To set how long the oven has to be in operation.
End To set the switch-off time for an oven function.
Duration and End can be used at the same
time, if the oven is to be switched on and off auto-
matically later. In this case first set Duration , then
End .
Setting the clock functions
1 2
1. Set an oven function and a temperature (not necessa-
ry for the Minute Minder). Refer to "Setting the oven
function".
2. Push again and again until the symbol for the
necessary clock function flashes.
3. To set the time for Minute minder , Duration
or End , push or button.
The related clock function symbol comes on.
When the time period is completed, the clock function
symbol flashes and an acoustic signal sounds for 2
minutes. Push any button to stop the signal.
With the functions Duration and End the ap-
pliance stops automatically.
4. Deactivate the appliance.
Cancelling the clock functions
1. Push again and again until the symbol for the
necessary clock function and flashes.
2. Push " " again and again until the time is "00:00".
Additional functions
Child lock
When the Child Lock is set, you cannot operate the
appliance.
Activating the Child Lock
1. Press to deactivate the appliance.
2. Press and at the same time, until the display
shows “SAFE”. The Child Lock is on.
Deactivating the Child Lock
To deactivate the Child Lock, do the same steps again.
Control Beep
Deactivating the control beep
1. Press to deactivate the appliance.
2. Press and hold the and buttons at the same
time, until a sound operates (approximately 2 sec-
onds).
The control beep does not operate.
8