2
1
7
Carefully lift (step 1)
and remove (step 2) the
panels of glass one by
one. Start from the top
panel of glass.
Clean the glass panels with water and soap. Dry the glass
panels carefully.
Installing the door and the glass panels
When the cleaning is completed, install the glass panels
and the oven door. Do the above steps in the opposite se-
quence.
Make sure that you put the
glass panels back in the
correct sequence.
Make sure that you install
the top panel of glass in
the seats correctly.
The middle panels have a decorative frame. When you in-
stall the middle panels, make sure that the screen-printing
zone looks to the inner side of the door. Make sure that
after the installation the surface of the glass panel frame
on the screen-printing zones is not rough when you touch
it.
What to do if…
Warning! Refer to "Safety information" chapter.
Problem
Possible cause
Remedy
The appliance does not heat
up.
The appliance is deactivated.
Activate the appliance.
The clock is not set.
Set the clock.
The necessary settings are not set.
Do a check of the settings.
The automatic switch-off is on.
Refer to "Automatic switch-off".
The Child lock is on.
Refer to "Deactivating the Child Lock".
The fuse in the fuse box is released.
Do a check of the fuse.
If the fuse is released more than one
time, contact a qualified electrician.
The oven lamp does not oper-
ate.
The oven lamp is defective.
Replace the oven lamp.
Steam and condensation col-
lect on the food and in the ap-
pliance.
You left the dish in the appliance for too
long.
Do not let the dishes stay in the appli-
ance for longer than 15-20 minutes after
the cooking is completed.
16
Summary of Contents for ZYB 594
Page 1: ...EN User manual Oven ZYB594 ...
Page 19: ...19 ...
