Zanussi ZWH 2101, User Manual

Page: 20 / 24

• On the edge of a sink.
Make sure that the plastic guide cannot move when
the appliance drains. Attach the guide to the water
tap or the wall.
• To a stand pipe with vent-hole.
Refer to the illustration. Directly into a drain pipe at a
height of not less than 60 cm and not more than 90
cm. The end of the drain hose must always be venti-
lated , i.e. the inner diameter of the drainpipe must
be larger than the external diameter of the drain
hose.
Without the plastic hose guide
• To a sink spigot.
Refer to the illustration. Put the drain hose in the
spigot and tighten it with a clip. Make sure that the
drain hose makes a loop to prevent that remaining
particles go in the appliance from the sink.
• Directly to a built-in drain pipe in the room wall and
tighten it with a clip.
20
www.zanussi.com