Zanussi ZWH 2101, User Manual

Page: 15 / 24

Warning! Deactivate the appliance before you do the
checks.
Problem Possible cause Possible solution
The appliance does not
start.
The mains plug is not connected in
the mains socket.
Put in the mains plug.
The fuse in the box fuse is damage. Replace the fuse.
The appliance door is open. Close the door firmly.
You do not press the start button Press the start button.
The programme knob is not in the
correct position.
Turn the programme knob in the correct posi-
tion.
The delay start is set.
It is available only for models with
the Delay start.
To start immediately the programme, cancel the
delay start.
The appliance does not fill
with water.
The water tap is closed. Open the water tap.
The water inlet hose is damaged. Make sure that the water inlet hose has no dam-
ages.
The filter in the water inlet hose is
blocked .
Clean the filter. Refer to 'Care and cleaning'.
The water tap is blocked or there is
limescale on it.
Clean the water tap.
The connection of the water inlet
hose is not correct.
Make sure that the connection is correct.
The water pressure is too low. Contact your local water authority.
The appliance does not
drain the water.
The water drain hose is damaged. Make sure that the water drain hose has no
damages.
The filter of the drain pump is
blocked.
Clean the filter of the drain pump. Refer to 'Care
and cleaning'.
The connection of the water drain
hose is not correct.
Make sure that the connection is correct.
A washing programme without the
drain phase is set.
Set the drain programme.
The function Rinse Hold is on. Set the drain programme.
The spin phase does not
operate.
The spin phase is off. Set the spin programme.
The filter of the drain pump is
blocked.
Clean the filter of the drain pump. Refer to 'Care
and cleaning'.
Balance problems with the laundry
load.
Adjust manually the items in the tub and start
the spin phase again.
15
www.zanussi.com