Zanussi ZWD86SB4PW, User Manual

Page: 20 / 40

SETTING A PROGRAMME
1. Turn the programme knob to switch the
appliance on and set the required programme:
• The indicator flashes.
• The display shows the level of the Time
Manager, the programme duration and the
indicators of the phases of the programme.
2. If necessary, change the temperature and the
spin speed or add available options. When you
activate an option, the indicator of the set
option comes on.
If you set something incorrect, the
display shows the message
.
STARTING A PROGRAMME WITHOUT THE
DELAY START
Press .
• The indicator of stops to flash and
stays on.
• The indicator starts to flash on the
display.
• The programme starts, the door locks, the
display shows the indicator .
If the indicator flashes, the
door is locking. If the display
shows an alarm message after
the indicator
has flashed
for a few seconds, it indicates
that the door is not properly
locked (for more details see
Troubleshooting chapter).
• The drain pump can operate for a short time
when the appliance fills water.
After approximately 15 minutes from
the start of the programme:
• The appliance adjusts automatically
the programme duration agree with
the laundry load.
• The display shows the new value.
STARTING A PROGRAMME WITH THE
DELAY START
1. Press Delay Start again and again until the
display shows the delay you want to set.
The related indicator comes on the display.
2. Press :
• The appliance starts the countdown.
• The door locks, the display shows the
indicator .
If the indicator flashes, the door is
locking. If the display shows an alarm
message after the indicator
has
flashed for a few seconds, it indicates that
the door is not properly locked (for more
details see Troubleshooting chapter).
• When the countdown is completed, the
programme starts automatically.
You can cancel or change the set of
the delay start before you press the
. To cancel the delay start:
• Press to set the appliance
to pause.
• Press Delay Start until the
display shows '.
• Press again to start the
programme immediately.
THE TIMECARE SYSTEM LOAD DETECTION
The TimeCare System adjusts the programme
duration to the load to achieve perfect washing
results in the minimum possible time. After touching
the Start/Pause button new cycle duration will
be displayed after 10-15 min.
The TimeCare System is not available
with all programmes such as :Wool,
Rinse, SpinDrain, and programmes
with short cycles.
INTERRUPTING A PROGRAMME AND
CHANGING THE OPTIONS
You can change only some options before they
operate.
1. Press .
The indicator flashes.
2. Change the options.
3. Press
again.
The programme continues.
CANCELLING A RUNNING PROGRAMME
1. Turn the programme knob to position to
cancel the programme and to deactivate the
appliance.
2. Turn the programme knob again to activate the
appliance. Now, you can set a new washing
programme.
20