20
Important!
Do not use the appliance without filters.
Cleaning the condenser unit
Clean the condenser when light
“Condensor” comes on.
The condenser is situated at the lower part
of the cabinet behind a small door. To open
the door, push the catch as per picture.
During the drying cycle or at the end, it is normal
for water to be present on the surface of the
condenser insertion.
To pull out the condenser, first turn the two
red stops downwards and then remove the
condenser unit holding it at the handle.
„
Clean it with a brush and rinse it under
theshower if necessary. Also clean the
outside, removing all fluff. Clean the
rubber seal round the condenser cabinet
and in the inner part of the small door
with a damp cloth.
Important
Do not use pointed objects or utensils to
clean the spaces between the plates, as
this could damage the condenser and
make it permeable. Re-fit the condenser,
turn the red stops upwards and close the
door.
Important!
Do not use this appliance if the
condenser has not been fitted.
Emptying the water reservoir
Water extracted from the laundry
condenses inside the machine and is
collected in a reservoir.
The reservoir
must be emptied after each drying
cycle
to ensure efficient operation when
the machine is next used. The pilot light
0639