7
Electrical connection
We strongly recommend that all operations for the
installation of your oven be carried out by
QUALIFIED PERSONNEL.
The oven designed to be connected to 240V
(50Hz) electricity supply.
The oven has an easily accessible terminal block
which is marked as follows:
Letter L
-
Live terminal
Letter N
-
Neutral terminal
-
Earth terminal
THIS APPLIANCE MUST BE
EARTHED
The cable used to connect the oven to the
electrical supply should have the characteristics
indicated in the table.
It is necessary that you install a double pole
switch between the appliance and theelectricity
supply (mains), with a minimum gap of 3 mm
between the switch contacts and of a type suitable
for the required load in compliance with the
current rules.
The switch must not break the yellow and green
earth cable at any point.
Important
After installation and connecting, the cable must
be placed so that it cannot at any point reach a
temperature of more than 50
°
C above the ambient
temperature.
Before the appliance is connected, check that the
main fuse and the domestic installation can
support the load; and that the power supply is
properly earthed.
The manufacturer disclaims any responsibility
should these safety measures not be carried out.
This appliance meets the requirements laid down
in EEC Directive No. 89/336 relating to the
suppression of radio and TV interference.
Models
Rating
Cable cross
Fuse
section mm
2
and
Type of the cable
min.
ZSM 703 SS 2840 W
2,5
Ho5 RR-F
13 A
