22
550 MIN
593
560 - 570
80÷100
Connecting the terminal board
The appliance incorporates an easily accessible 6-pole
terminal board whose jumpers (bridges) are already
pre-set for operation on 400V tri-phase with neutral wire
(Fig.35). In case a different mains voltage is present, the
jumpers on the terminal board must be rearranged as
shown in the diagram (Fig.36). The ground cable must
be connected to terminal
. After connecting the supply
cable to the terminal board, secure it with a junction clamp.
The Manufacturer disclaims any liability in case
these accident-preventing rules are not observed.
FO 0330
Fig. 36
Fig. 35
230V 3~
1 2 3 4 5
L1 L2 L3 PE
230V 1~
1 2 3 4 5
L1 N PE
400V 2N~
1 2 3 4 5
L1 L2 N PE
400V 3N~
1 2 3 4 5
L1 L2 L3 N PE
FO 0584
Ø 4x2,5mm²
Ø 3x2,5mm²
Ø 4x2,5mm²
Ø 5x1,5mm²
Fig. 37
Fig. 38
To ensure correct operation of the built-in assembly, the
kitchen cabinet and the recess for the built-in appliance
must have suitable dimensions. When the appliance is
fitted-in, there must be no open spaces left and it must
be closed on all sides by the kitchen furniture to prevent
the possibility of inadvertently touching “live” (current
carrying) parts of the oven. All parts ensuring such a
protection, including any covering panel (for instance, if
the appliance is installed at the end or at the beginning
of a kitchen counter) must be fastened in such a way as
to prevent removal of the same without the aid of some
tool. This appliance can be placed with its back and with
one side close to appliances or walls of higher height.
The other side, instead, must be placed close to furni-
ture or appliances, having the same height.
Oven dimensions (Fig. 37)
Building-in under a kitchen
counter
The recess must have the dimensions shown in Fig. 38.
Before carrying out the building-in of the oven, connect it
to the hob (see corresponding chapter); then recess
completely the oven under the counter; open the oven
door and secure the oven to the kitchen cabinet with four
wood screws which are to fit exactly into the holes
provided for the purpose on the oven frame (Fig.39).
Building-in
Fig. 39
