Zanussi ZOB 691, Instruction Manual

Page: 12 / 19

12
Fig. 8
Fig. 9
Fig. 7
Replacing the Oven Light
If the oven bulb needs replacing, it must comply with the
following specifications:
- Power: 15 W,
- Voltage: 230 V (50 Hz),
- Temperature Rating of 300 °C,
- Thread type: E14.
These bulbs are available from your local Service Force
Centre.
To replace the faulty bulb (Fig. 7):
1. Ensure the oven is disconnected from the electrical
supply.
2. Turn the glass cover anticlockwise.
3. Remove the faulty bulb and replace with the new one.
4. Refit the glass cover.
5. Reconnect to the electrical supply.
The Hinged Grill
Some models are fitted with a hinged grill element, to
enable you to clean the roof of the oven easily.
Before proceeding ensure the oven is cool
and is isolated from the electricity supply.
●
Undo the screws which hold the grill in place (see
Fig. 8). When doing this operation for the first time,
we recommend using a screwdriver.
●
Then gently pull the grill downward to allow access to
the oven roof.
●
Clean the oven roof with a suitable cleaner and wipe
dry before replacing the hinged grill element.
●
Gently push up the grill element into place and firmly
screw into place the holding nuts.
Ensure the grill holding nuts are firmly in place
to avoid the grill falling down when in use.
Grease Filter
When cooking meat, the grease filter must be fitted over
the oven fan by clipping it over the vents in the back
panel. This will prevent a built-up of fat on the fan impellor.
Do not use abrasive materials to clean the seal. The
grease filter is dishwasher proof.
When cooking is completed and the oven has cooled
down, remove the filter by pushing the protruding tongue
on the filter upward. (See Fig. 9) Wash the filter after use
using warm soapy water.
Fit the grease filter only when roasting.