background image

• Install the appliance with its back and one side close

to the higher appliance. The other side must be close

to appliance with the same height.

• The appliance cannot be positioned on a base.
• Built in ovens and built in cooking surfaces are at-

tached with special connection system. To prevent

damage to the appliance, only use an appliance with

the appliances from the same manufacturer.

Electrical connection

• The appliance must be earthed.
• Make sure that the electrical data on the rating plate

agree with your domestic power supply.

• Information on the voltage is on the rating plate.
• Always use a correctly installed shockproof socket.
• When you connect electrical appliances to mains sock-

ets, do not let cables touch or come near the hot ap-

pliance door.

• Do not use multi-way plugs, connectors and extension

cables. There is the risk of fire.

• Do not replace or change the mains cable. Contact the

service centre.

• Make sure not to squash or cause damage to the mains

plug (if applicable) and cable behind the appliance.

• Make sure that the mains connection is accessible after

the installation.

• Do not pull the mains cable to disconnect the appli-

ance. Always pull the mains plug – if applicable.

Use

• The appliance is only for domestic use. Do not use the

appliance for commercial and industrial use.

• Only use the appliance for domestic cooking tasks.

This is to prevent physical injury to persons or prevent

damage to property.

• Do not use the appliance as a work surface or storage

surface.

• Do not put flammable products or items that are wet

with flammable products, and/or fusible objects (made

of plastic or aluminium) in, near or on the appliance.

There is the risk of explosion or fire.

• The interior of the appliance becomes hot during use.

There is the risk of burns. Use gloves when you insert

or remove the accessories or pots.

• Be careful when you remove or install the accessories

to prevent damage to the oven enamel.

• Always stay away from the appliance when you open

the door while the appliance is in operation. Hot steam

can release. There is the risk of skin burns.

• To prevent damage or discoloration to the enamel:

– do not put any objects directly on the appliance floor

and do not cover it with aluminium foil;

– do not put hot water directly into the appliance;
– do not keep moist dishes and food in the appliance

after you finish the cooking.

• Discoloration of the enamel has no effect on the per-

formance of the appliance

• Do not use this appliance if it is in contact with water.

Do not operate the appliance with wet hands.

• Do not apply pressure on the open door.
• Always close the appliance door when you cook, even

while grilling.

Care and cleaning

• Before maintenance, switch off the appliance and dis-

connect the appliance from the power supply.

• Before maintenance, make sure that the appliance is

cold. There is the risk of burns. There is the risk that

the glass panels can break.

• Keep the appliance clean at all times. A build-up of fats

or other foodstuff can result in a fire.

• Regular cleaning prevents the surface material from

deteriorating

• For your personal safety and the safety of your prop-

erty, only clean the appliance with water and a soap.

Do not use flammable products or products that can

cause corrosion.

• Do not clean the appliance with steam cleaners, high-

pressure cleaners, sharp objects, abrasive cleaning

agents, abrasive sponges and stain removers

• If you use an oven spray, follow the instructions from

the manufacturer. Do not spray anything on the heating

elements and the thermostat sensor.

• Do not clean the glass door with abrasive cleaning

agents or metal scraper. Heat resistant surface of the

inner glass can break and shatter.

• When the door glass panels are damaged they become

weak and can break. You must replace them. Contact

the service centre.

• Be careful when you remove the door from the appli-

ance. The door is heavy!

• Do not clean catalytic enamel (if applicable).

 

3

Summary of Contents for ZOB 343

















Reviews: