Zanussi ZOA35802, User Manual

Page: 15 / 24

• Clean the front of the appliance with a soft
cloth with warm water and a cleaning agent.
• To clean metal surfaces use a usual cleaning
agent.
• Clean the oven interior after each use. Then
you can remove dirt more easily and it does
not burn on.
• Clean stubborn dirt with a special oven
cleaner.
• Clean all oven accessories after each use
and let them dry. Use a soft cloth with warm
water and a cleaning agent.
• If you have nonstick accessories, do not
clean them using aggressive agents, sharp-
edged objects or a dishwasher. It can de-
stroy nonstick coating.
Stainless steel or aluminium applian-
ces:
Clean the oven door with a wet sponge only.
Dry it with a soft cloth.
Do not use steel wool, acids or abrasive materi-
als, as they can cause damage to the oven sur-
face. Clean the oven control panel with the
same precautions.
Cleaning the door gasket
• Regularly do a check of the door gasket. The
door gasket is around the frame of the oven
cavity. Do not use the appliance if the door
gasket is damaged. Contact the Service
Centre.
• To clean the door gasket, refer to the general
information about cleaning.
Removable shelf supports and catalytic
panels
To clean the oven, remove the shelf supports
and catalytic panels.
Warning! Be careful when you remove
the shelf supports. The catalytic panels are
not attached to the oven walls and can fall out
when you remove the shelf supports.
Warning! Before maintenance, make sure
that the appliance is cool. There is a risk of
burns.
1
Pull the front of
the shelf support
away from the side
wall.
Hold the rear end of
the shelf support and
the catalytic panel in
position with the oth-
er hand.
2
1
2
Pull the rear end
of the shelf support
away from the side
wall and remove it.
Installing the shelf supports
Install the shelf supports in the opposite se-
quence.
The rounded ends of the shelf supports
must point to the front.
Catalytic walls
The walls with catalytic enamel are self-clean-
ing. They absorb fat which collects on walls
when the oven operates.
To support the self-cleaning process:
1. Activate the oven lamp.
2. Remove the accessories from the appli-
ance.
3. Clean the oven floor with warm water and
washing-up liquid, then dry it.
4. Set the function
and maximum tempera-
ture.
5. Let the empty appliance operate for one
hour.
6. When the appliance is cool, clean it with a
soft and moist sponge.
Warning! Do not clean the catalytic
surface with oven sprays, abrasive
cleaning agents, soap or other cleaning agents.
There is a risk of damage to the catalytic
surface.
15
www.zanussi.com