background image

In the event of having to change the fuse in the
plug supplied, a 13 amp ASTA approved
(BS1363/A) fuse must be used.
Should the plug need to be replaced for any
reason, proceed as described below.
The wires in the mains lead are coloured in ac-
cordance with the following code:

1

2

3

4

1

Green & Yellow

2

Brown

3

Cord clamp

4

Blue

The wire coloured green and yellow must be
connected to the terminal marked with the letter
«E» or by the earth symbol 

 or coloured

green and yellow.
The wire coloured blue must be connected to
the terminal «N» or coloured black.
The wire coloured brown must be connected to
the terminal marked «L» or coloured red.
Upon completion there must be no cut, or stray
strands of wire present and the cord clamp
must be secure over the outer sheath.

Warning!

 

A cut off plug inserted into

a 13 amp socket is a serious safety

(shock) hazard.
Ensure that the cut off plug is disposed of
safely. Should the appliance power
supply cable need to be replaced, this
must be carried out by our Service Force
Centre. The appliance should not be
connected to the electrical supply by
means of an extension cable.

Note!

When the appliance is installed the power sup-
ply cable must be accessible.

Permanent connection

In the case of permanent connection it is nec-
essary that you install a double pole switch be-
tween the appliance and the electricity supply
(mains), with a minimum gap of 3 mm between
the switch contacts and of a type suitable for
the required load in compliance with the current
electrical regulations.
The switch must not break the yellow and green
earth cable at any point.

Environmental concerns

The symbol   on the product or on its
packaging indicates that this product may not
be treated as household waste. Instead it
should be taken to the appropriate collection
point for the recycling of electrical and
electronic equipment. By ensuring this product
is disposed of correctly, you will help prevent
potential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste
handling of this product. For more detailed
information about recycling of this product,
please contact your local council, your
household waste disposal service or the shop
where you purchased the product.

Packaging materials

The materials marked with the symbol 

 are

recyclable.
>PE<=polyethylene
>PS<=polystyrene
>PP<=polypropylene
This means that they can be recycled by dis-
posing of them properly in appropriate collec-
tion containers.

Ecological hints

To save water, energy and to help protect the
environment, we recommend that you follow
these tips:

• Normally soiled laundry may be washed with-

out prewashing in order to save detergent,
water and time (the environment is protected
too!).

30

 

www.zanussi.com

Summary of Contents for ZKN 7147 J

































Reviews: