SETTING THE FUNCTION: MICROWAVE
COMBI
You can combine the microwave function with any
of the heating functions.
1. Turn the knob for the oven functions to select
an oven function.
The display shows a default temperature.
2. Turn the knob for the temperature / microwave
power to change the temperature.
3. Press to combine heating function with the
microwave mode.
While using Microwave Combi
function the oven can make
various noises. They are normal for
this function.
4. Turn the knob for the temperature / microwave
power to change the microwave power
settings. The power setting changes in 100
Watt steps.
You can set Duration for Microwave
Combi function. When you set time for
Duration for more than 7 minutes and
in Combi mode, the Microwave power
cannot be higher than 600 W.
Around 5 degrees before the set temperature is
reached the signal sounds. When the set time for
Duration ends the signal sounds again and the
function Microwave Combi stops.
5. Turn the knob for the oven functions to the off
position.
HEAT-UP INDICATOR
When the oven function operates, the bars in the
display appear one by one when the
temperature in the oven increases, and disappear
when it decreases.
CLOCK FUNCTIONS
CLOCK FUNCTIONS TABLE
Clock function
Application
TIME OF DAY
To show or change the time of day. You can change the time
of day only when the oven is off.
DURATION
To set how long the oven operates. Use only when an oven
function is set.
END
To set when the oven turns off. Use only when an oven func-
tion is set.
TIME DELAY
Combination of DURATION and END function.
MINUTE MINDER
Use to set a countdown time. This function has no effect on
the operation of the oven. You can set the MINUTE MINDER
at any time, also if the appliance is off.
00:00
COUNT UP TIMER
If you do not set any other clock function the COUNT UP TIM-
ER automatically monitor how long the oven operates.
It is on immediately when the oven starts to heat.
The Count Up Timer cannot be used with the functions: DU-
RATION, END.
SETTING AND CHANGING THE TIME
After the first connection to the mains, wait until the
display shows
and "12:00". "12" flashes.
1. Press or to set the hours.
2. Press to confirm and switch to set the
minutes.
The display shows
and the set hour. "00"
flashes.
3. Press or to set the current minutes.
9
