objects or a dishwasher. It can cause damage
to the nonstick coating.
• Dry the oven when the cavity is wet after usage.
REMOVING THE SHELF SUPPORTS
Before maintenance, make sure that the oven is
cool. There is a risk of burns.
To clean the oven, remove the shelf supports.
1. Pull carefully the supports up and out of the
front catch.
2
3
1
2. Pull the front end of the shelf support away
from the side wall.
3. Pull the supports out of the rear catch.
Install the shelf supports in the opposite sequence.
REPLACING THE LAMP
Put a cloth on the bottom of the interior of the
appliance. It prevents damage to the lamp glass
cover and the cavity.
WARNING! Danger of electrocution!
Disconnect the fuse before you
replace the lamp.
The lamp and the lamp glass cover
can be hot.
CAUTION! Always hold the halogen
lamp with a cloth to prevent grease
residue from burning on the lamp.
1. Deactivate the appliance.
2. Remove the fuses from the fuse box or
deactivate the circuit breaker.
The top lamp
1. Turn the lamp glass cover counterclockwise to
remove it.
2. Clean the glass cover.
3. Replace the lamp with a suitable 300 °C heat-
resistant lamp.
4. Install the glass cover.
TROUBLESHOOTING
WARNING! Refer to Safety chapters.
WHAT TO DO IF...
Problem
Possible cause
Remedy
You cannot activate or operate
the oven.
The oven is not connected to
an electrical supply or it is con-
nected incorrectly.
Check if the oven is correctly
connected to the electrical
supply (refer to the connection
diagram if available).
The oven does not heat up.
The oven is deactivated.
Activate the oven.
The oven does not heat up.
The clock is not set.
Set the clock.
The oven does not heat up.
The necessary settings are not
set.
Make sure that the settings are
correct.
The oven does not heat up.
The automatic switch-off is ac-
tivated.
Refer to "Automatic switch-
off".
30
Summary of Contents for ZKC44510XA
Page 1: ...GETTING STARTED EASY User Manual ZKC44510XA EN User Manual Microwave combi oven ...
Page 33: ...33 ...
Page 34: ...34 ...
Page 35: ...35 ...