Zanussi ZJB9476, User Manual

Page: 12 / 52

Fitting the side panels
1
17,5
1015
64
539
260*
541
280
15
820
15
30
2
3
• Fit the brackets onto the
panels in the positions
shown in the diagram.
The dimension of 260*
mm is allowed for fitting
a 100 mm plinth below
the panel. For different
plinth sizes, increase the
dimension of 260* mm
accordingly.
1. Rear edge
2. Front edge
3. Right hand side panel
2
D
D
1a
1b
• Apply spacers to the
hinges before installing
the appliance into the
cabinet . See picture.
45
• Rest the panels against
the appliance.
• Fit the rear brackets, tak-
ing into account the
thickness of the panels
(maximum width of unit
900 mm).
• For a correct alignment
make sure that the dis-
tance between the appli-
ance and the cabinet is
of 45 mm.
• Secure the panels at the
front.
• Fix the squares (con-
tained in the bag) to the
lower part of the door
(references already pro-
vided).
L
L
2
1
N
• If necessary, door open-
ing agle max 90° can be
obtained by introducing
the pivots supplied sep-
arately. See picture.
Fitting the door panels
1
2
• Open a door a remove the bracket
cover.
Undo the nuts with washers and
remove the bracket from the door.
1013
25
1013
25
60 4 4 60
444MIN.
447MAX.
444MIN.
447MAX.
4 5
6 7
25 25
193 193 193 193
3MIN
214 214
• Drill the small doors as shown in
the figure.
1. Top right-hand front panel
2. Top left-hand front panel
3. Bottom right-hand front panel
4. Bottom left-hand front panel
• Fix the bracket to the door with the
screws contained in the bag.
12