Zanussi ZJB9476, User Manual, Page: 10 / 52

Problem Possible cause Solution
The product temperature is too high. Let the product temperature decrease to
room temperature before storage.
Many products are stored at the same
time.
Store less products at the same time.
The temperature in the refrigera-
tor is too high.
There is no cold air circulation in the
appliance.
Make sure that there is cold air circula-
tion in the appliance.
The temperature in the freezer is
too high.
Products are too near to each other. Store products so that there is cold air
circulation.
There is too much frost. Food is not wrapped correctly. Wrap the food correctly.
The door is not closed correctly. Refer to "Closing the door".
Replacing the lamp
1. Disconnect the mains plug from the mains socket.
2. Remove the lamp
cover (refer to the
illustration).
3. Replace the used
lamp with a new
lamp of the same
power and specifi-
cally designed for
household appli-
ances. (the maximum power is shown on the lamp
cover).
4. Connect the mains plug to the mains socket.
5. Open the door. Make sure that the lamp comes on.
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to "Installation".
3. If necessary, replace the defective door gaskets. Con-
tact the Service Center.
Technical data
Dimension of the recess
Height 1900 mm
Width 860 mm
Depth 550 mm
Rising Time 14 h
The technical information are situated in the rating plate
on the internal left side of the appliance and in the energy
label.
Installation
Positioning
Install this appliance at a location where the ambient tem-
perature corresponds to the climate class indicated on the
rating plate of the appliance:
10