77
FO 0414
The following instructions are meant to a qualified
technician, in order to allow him carry out the
installation in compliance with the rules in force.
The building-in and the electrical connection fo the
appliance must be carried out by a qualified and
authorized technician only.
BUILDING IN
It is important that the dimensions and materials of the
surround or cabinet into which the oven will be built are
correct and will withstand a temperature increase.
A correct installation will have to ensure a proper
protection against contact with electric parts or merely
functionally isolated parts.
All the units meant to ensure protection have to be fitted
not to be taken away without using any tool.
We recommed not to install the appliance near
refrigerators or freezer, since the heat could affect the
performance of these appliances.
The oven recess must comply the dimensions
given in Fig. 11.
This appliance is registered as a Class “Y” product
according to the overheating safety regulations.
Due to this classification, the rear and one of the sides
of the furniture unit which the appliance is built in, can
come in contact with higher appliances, walls or
furniture units.
The other side of the furniture unit which the appliance
is built in, can come in contact with other appliances,
walls or furniture units with the same height.
550 min
595
22,5
20
30
20
4
7
Fig. 12
A 0049
Fig. 11 - Oven dimensions
12. To the attention of the installer
