74
Replacing the Oven Light
•
Ensure the electricity supply is switched off before
carrying out this operation.
The oven bulb has to comply to these features:
a) resistant to temperatures of 300
°
C;
b) electric rate: 230 V - 50 Hz;
c) electric power rate: 25 W.;
d) connection type: E 14.
To replace the bulb, proceed as follows:
(fig. 9)
a) push in and turn the glass lid anticlockwise;
b) remove tha faulty bulb;
c) replace it with a new one;
d) refit the glass lid;
e) switch on the electricity supply.
Fig. 9
FO 0287
SOLUTION
◆
Check the oven is switched on and that a cooking function
has been selected
or
◆
Check the appliance is wired in properly, and the socket
switch or the switch from the mains supply to the oven are
ON.
◆
Press button 1 to switch on the oven
or
◆
Buy a new oven light bulb, asking for it to your local Zanussi
Service Centre and replace it by following the instruction
provided in this booklet.
◆
Refer to the contents of this booklet, especially to the
chapter "Using the Oven".
◆
Leave dishes inside the oven no longer than 15-20 minutes
after the cooking is completed.
SYMPTOM
■
The oven does not come on
■
The oven light does not come on
■
It takes too much time to finish the dishes, or they are
cooked too fast.
■
Steam and condensation settle on the food and the
oven cavity.
If the appliance is not working correctly, please carry out the following checks, before contacting your local
Zanussi Service Centre.
8. What happens if something goes wrong
