Zanussi ZHC 950, Instruction Booklet

Page: 8 / 20

Position the new charcoal filter in the
position marked and while holding the
filter replace the fixing hooks as
illustrated.
This appliance can be a possible fire
hazard if the grease and charcoal
filters are not cleaned and replaced as
recommended.
Changing the Light Bulb
Remove the screw fixing the lighting
support.
Pull the lighting support downwards.
Remove the light bulb by unscrewing it
anticlockwise.
Insert the new light bulb into the lighting
support and screw it clockwise taking
care not to overtighten the light bulb.
If one of the light bulbs has failed to function
check that the lamps is fully screwed into the
lighting support. If lamp failure has occurred
then it should be replaced with a 40W clear
cylindrical lamp with an E14 screw cap.
Replacement filters and light bulbs can
be obtained from your local Service
Force Centre.